LED Strobe Warning Light Bike: The Ultimate Guide

LED Strobe Warning Light Bike is essential when riding your Bike.

They increase the visibility of your Bike as well as lighting up your way in the dark.

Increased visibility prevents possible accidents that could occur on the road or off the road.

Rear Tail LED Strobe Warning Light for Bike

Design and Features of LED Strobe Warning Light Bike

LED Strobe lights are expertly designed to make them more durable.

They have the following features that help them maximize their functions.

• Flash(Strobe) Modes; leads to increased visibility which is an added advantage, especially at night.
• Easy installation: the LED Strobe Warning lights are equipped with holes and screws to ease the installation burden.
• LED Lights; LED Strobe Warning lights have LED Lights which generally have increased brightness compared to other lights
• Water-resistant; LED Strobe Warning lights are made water-resistant, which makes them perfect even in rainy weather.

Material Considerations for LED Strobe Warning Light Bike

Housing

The housing is significant and determines the LED Strobe Warning Light durability as it protects the inner components.

It is crucial to ensure that the housing material is sturdy and will last long under strenuous conditions.

The primary materials used for the housing are;

1. Aluminum: It is lightweight, strong, is not affected by adverse weather conditions, an excellent heat sink, odourless, and non-toxic. Because of all these properties, aluminium is the most common housing material.
2. Polycarbonate; is clear and has up to 90% transparency. It is strong and can withstand heavy impact, adverse weather, and very easy to clean.

Electrical Components

The LED Strobe Warning lights are equipped with electrical components made with environmentally friendly materials.

• Circuit Boards

The most common materials used for the circuit board are;

• Aluminium

Aluminum Is the most common base material used for the printed circuit board.

Aluminium is highly durable and very strong.

It can also conduct heat away from the essential parts prolonging its life.

These properties make it superior to other materials used to create a printed circuit board.

• Copper

Copper is used to making the electrical wiring.

Cooper has very high thermal and electrical conductivity.

Lens Options for LED Strobe Warning Light Bike

Below are some lens options we offer for our LED Strobe Warning Light Bike:

Spot

LED Spot Lights are used to provide intense, direct light.

They give out light at a narrow beam angle.

Their main advantage is their intense brightness; they alert oncoming traffic of your presence.

The spot lens practicality is limited because it illuminates a minimal area.

Flood

LED Flood lens has a large beam angle range.

The wide angles allow it to illuminated a wider area.

Their broad coverage makes them suitable for a night ride as you are less likely to get into an accident.

Hybrid

LED Hybrid lens is a combination of the intensity of spot lens and the wide range of flood lens.

It gives out light that is both bright and has excellent coverage.

Hybrids are highly recommended as they are the best of both flood and spot lens.

Difference between Clear and Amber LED Strobe Warning Light Bikes

Clear LED Strobe Warning Light for Bikes is sharper and brighter compared to amber lights.

They are bright and are therefore great for visibility.

They are great for riding at night.

Amber lights can penetrate low visibility conditions such as fog, rain, dust, among others.

In areas that experience such situations, amber lights are much more suitable.

Amber LED Strobe Warning bike lights are warmer and light up the area around you as well.

Electronic Components of LED Strobe Warning Light Bikes

The main components found in any LED Strobe Warning Light are the following;

555 Timer Integrated Circuit

This is an affordable circuit better known for its precision timing device.

The device has various applications, including acting as a timer, pulse generator, delay, and oscillator.

High Power LED

These are LED which have a higher power output in comparison to regular LEDs.

10k Resistor

It helps drop the voltage. It also limits the current flow.

Capacitor

The capacitor stores electrical charges.

Potentiometer

A potentiometer is a resistor with three terminals that executes a sliding contact that forms a flexible voltage divider.

Breadboard

This is a plastic board with tiny holes into which electrical components are inserted.

Most breadboards have a rectangular shape.

Connecting Wires and Batteries

The connecting wires link up the various components.

The batteries, in turn, power up the whole device by transmitting electric current via the connecting wires.

Available Types of LED Strobe Warning Light Bike in the Market

There are several LED Strobe Warning Light Bike you can choose from depending on your need:

• Headlight LED Strobe Warning Light illuminates your path in the dark
• Bike handle LED Strobe Warning Light increases your visibility as well as widens your field of view
• Rear LED Strobe Warning Light alerts oncoming traffic and pedestrians of your presence
• Brake light LED Strobe Warning Light serve as a warning to oncoming vehicles and passersby, warning them of your existence.

Front/Rear/Helmet LED Strobe Warning Bike Lights

Lamps you can use with LED Strobe Warning Light Bike

For additional visibility and improved vision, you can opt to use the LED Strobe Warning Light Bike together with the below lights:

• Helmet lights – these can be used whenever you require extra visibility.
• Daytime lights – although it is not as popular, a day-flash mode will enhance your visibility and help keep you seen

Best Light Colors for LED Strobe Warning Light Bike

Some of the most recommended colours for LED Strobe Warning Light for Bikes are;

Red

Red Warning Lights are primarily used for emergencies.

They are highly visible over long distances, and it quickly draws attention.

White

White lights can also be used for LED Strobe Warning Light.

They provide increased visibility.

Amber

Amber lights can penetrate low visibility conditions such as fog, rain, dust, among others.

In areas that experience such situations, amber lights are much more suitable.

Surface Treatment Options for LED Strobe Warning Light Bike

To increase the lifespan and functionality of our LED Strobe Warning Light Bike, we employ the below surface treatment techniques:

Adopting Chrome Plate

This method of surface treatment involves coating the surface of the LED Strobe Warning Lights with chromium.

It is done to prevent corrosion, to increase friction, for aesthetic purposes, among others.

Spray-paint Treating

This technique involves spraying the coating material on the LED Strobe Warning Light.

The spray technique ensures that the entire surface of the lights is evenly coated.

Coating

This technique involves coating the surface of the Strobe Warning Light with chemical compounds.

It helps reduce corrosion and prolong the lifespan of the Strobe Warning Light

Available Flash Patterns in LED Strobe Warning Light Bike

There are several flash patterns in LED Strobe Warning Lights.

We apply different styles at once to make them more effective.

Our LED Strobe Warning Lights are labelled according to how many patterns are available.

Working Temperature of LED Strobe Warning Light Bike

The working temperature for LED Strobe Warning Light ranges from 20°C to 50°C.

However, the temperature can go up as high as 90°C

High temperatures are not recommended as they damage the LED Strobe Warning Light.

Therefore, it is essential to select the LED Strobe Warning Light housing that acts as a good heat sink.

Keeping the LED at optimum temperature lengthens the lifespan of the LED Strobe Warning Light Bike.

Price for LED Strobe Warning Light Bike

The price for Prices for LED Strobe Warning Light for Bikes differs from one manufacturer to another.

Various things determine the price, including the flash pattern and the materials used to build.

The location of the manufacturer should also be taken into account.

International products may sometimes include the shipping fee in the Price for LED Strobe Warning Light Bike.

Bicycle LED Strobe Warning Lights

The benefit of IP-67 Standard for LED Strobe Warning Light for Bikes

There are several levels of Ingress Protection (IP).

An IP67 rated product implies that it is completely protected against dust and waterproof.

LED Strobe Warning Lights for Bikes that are waterproof and are protected against solid objects are much more durable.

They can be used even in harsh weather conditions such as during rain.

Difference between SAE J845 and SAE J595 Compliant LED Strobe Warning Light Bike

The Society for Automotive Engineers (SAE) has classified warning lights in different classes.

The classification is based on the brightness of a single beam pointed in a particular direction.

There are three main classes which are; class1, 2, and 3. SAE J845 and SAE J595 usually precede them.

SAE J595 refers to flashing visual warning lights that are directional.

They are lights with a narrow beam angle.

SAE J845 refers to optical warning lights that have a broader beam angle range.

The range is 360°, meaning it covers every direction.

Rules and Regulations for using LED Strobe Warning Light for Bikes

The Road Vehicles Lighting (Amendment) Regulations 2005 number 2559 legalized flashing lights for bikes as primary lights.

In the US, it is a legal requirement for bikes to have lights on at night.

The law requires at least a white headlight on the front of the Bike.

The white light should be visible from at least 500 feet.

A red reflector on the back should be present and afford visibility from at least 600 feet.

Bikes can use either a continuous or blinking red light for the rear lights.

This is according to a section of the Revised Code of Washington (RCW) States that in addition to a red rear reflector,

Recommended Lumens for LED Strobe Warning Light for Bike

While there are several regulations and restrictions for LED Strobe Warning Lights for vehicles, almost none makes them illegal on bikes.

Most bikers prefer LED Strobe Warning Light with higher lumen to increase their visibility, maximizing their safety and those around them.

Those who live in city centres that are well lit even at night opt for a lower lumen of 500 and below.

Their lights are simply for being seen rather than illumination.

However, those who live off-road, rocky terrains have different lumens recommendation.

Lumens for motorcycle LED Strobe Warning Light should be over 1200 and 1000 for bicycles for maximum illumination and visibility.

How to Choose the best LED Strobe Warning Light for your Bike.

Choosing the correct light will make a huge difference and give you plenty of assurance when you’re out riding.

The durability, flexibility, and price are all crucial factors that will ensure you get the best product you can.

The last thing you want is for your lights to stop working at an inopportune time.

That is why we focus on durability as one of the essential qualities of a good LED Strobe light.

Accessories you may need for LED Strobe Warning Light Bike

Similarly to most devices you purchase, you will also need accessories to complement the LED Strobe Warning Light Bike.

Below is a list of some extras you might need:

Power Supply Cables

You can purchase quality power supply cables that act as connectors for your warning lights.

Nevertheless, LED Strobe Warning Light comes equipped with wires.

Magnetic Mounts

It is possible to purchase magnetic mounts forgoing the more traditional method that involves wires and screws.

This method helps keep the integrity of your Bike intact.

It is also easier to mount and unmount the LED Strobe Warning Light if you want to upgrade your lights.

Dust Cover

Most LED Strobe Warning Lights are IP rated, which means that they have a certain level of dust protection and are waterproof.

The level of protection depends on the rating given.

Not all LED Strobe Warning Lights are entirely protected from dust.

Therefore, a dust cover may come in handy as it offers extra protection.

Flash Tube

The flash tube can be replaced if it is damaged.

Installation Options for LED Strobe Warning Light Bikes

Installation of LED Strobe Warning Lights depends entirely on the type of strobe light in question.

Different manufacturers have different installation options.

Some LED Strobe Warning Lights can simply hang next to the rearview mirror using their super elastic rubber.

Others can be mounted using magnetic mounts.

There are also permanent ones that require screwing and connection of wires.

Rearview Mirror

This type of installation involves;

• The first step would be to disconnect the wiring harness from the end of the mirror.
• Unscrew the mirror, placing it on a worktop.
• Next step involves opening the mirror housing using a screwdriver, leaving the mirror and the circuit boards connected to the front casing.
• The next step is to drill a hole on the lower casing for the LED Strobe Warning Lights.
• Insert the Strobe Warning Light LED in the hole you have drilled. You can make adjustments to the position of the lights to maximize the light based on your requirements.
• It is crucial to make sure that the LED Strobe Warning Light remains in place. This can be done using glue.
• You should ensure that the wires are placed correctly and do not come into contact with any of the moving parts
• The next step is to reassemble the mirror, ensuring that the LED Strobe Warning Light wires are correctly placed and out of the way
• The last step is to remount the mirror and connect the harness.

Rear LED Strobe Warning Light Bike

License Plate Frame

The same applies to the license plate frame, depending on the LED Strobe Warning Lights design.

They can be installed by mounting them using magnetic mounts or screwing and connecting of wires for permanent ones.

Wire installation involves;

• The first step is to Disconnect the battery. This is done at the negative terminal.
• After disconnecting the battery, you then proceed to Remove the seat.
• The next step would be to take out the taillight lens.
• Installing the License Plate Frame on the license plate, ensuring the wires are correctly connected.
• After that, you need to disconnect the taillight LED from the box in its housing.
• Locate wires colored red with traced with yellow, blue, and black next.
• The wires should be connected accordingly: they all go from the license plate frame to the taillight.

The Black ground wire from the taillight should be connected to the Green ground wire at the license plate frame.

Blue taillight from the taillight should be connected to the Yellow taillight at the license plate frame.

Red traced with yellow brake wire from the taillight should be connected to the Blue brake wire at the license plate.

• The next step is to Install the taillight lens making sure the wires do not come into contact with the moving parts.
• The last step is reconnecting the battery and ensuring that both the license plate frame and the taillight are operational.

How to Fit LED Strobe Warning Light in Bikes

LED Strobe Warning Light can be fitted in various ways.

The most common and rather traditional method is wiring the LED Strobe Warning Light into the desired place.

The first step is to remove the part that you want to fit the lights into.

This could be the rearview mirror or the license plate.

You then drill the desired place where the LED Strobe Warning Light is supposed to go.

Correctly connecting the wires is crucial in fitting the LED Strobe Warning Light.

Securing the path that the wires follow is also key.

You should also ensure that the LED Strobe Warning Light is properly positioned.

You finish the process by reassembling the components and ensuring that the LED Strobe Warning Light works perfectly fine.

Installed LED Strobe Warning Light Bike

Factors that influence the Lifespan of LED Strobe Warning Light Bike

As in most LED Strobe Warning Lights, the temperature is one of the most damaging factors.

They can last up to ten years or more; however, extreme temperatures can damage the LED Chips, thereby reducing the lifespan drastically.

Therefore, areas with both extremely high and low temperatures influence the lifespan of LED Strobe Warning Light Bike by decreasing it.

Additionally, poor installation can reduce the lifespan of a LED Strobe Warning Light Bike.

If not firmly fixed, the warning light might fall off and get damaged.

Lastly, where you make your purchase can also determine how long you use your LED Strobe Warning Light Bike.

Products from certified manufucturers and dealers tend to last longer.

Testing Methods used to Check the Quality of LED Strobe Warning Light Bike

The below testing methods are employed to ascertain the quality and to comply with International Standards for LED Strobe Warning Light bIke:

Rubbing Alcohol Test

The Warning Lights usually have labels that indicate which tests have been performed on them and what kind of protection they have.

The labels can, however, be fabricated.

If there is any doubt about whether the label is authentic or not, you can simply use rubbing alcohol.

Fake labels rub off easily when subjected to rubbing alcohol.

Fatigue Test

This is done by flicking the switch on and off repeatedly.

LED Strobe Warning Light has a long lifespan.

If, in any case, you observe any flickering, it is an indication of inadequate quality lights.

Functionality Test

This ensure that the LED Strobe Warning Light bike can execute all its intended functions like turning on and off and flashing.

Endurance Testing

This is executed by leaving the LED Strobe Warning Light on at a maximum setting for about four hours.

The light is of hight quality if it does not reduce in brightness or show any signs of reduced performance.

Troubleshooting Options for LED Strobe Warning Light Bike

One of the most common problems faced by LED Strobe Warning Lights is hyper flash.

This is when the lights blink too fast.

This problem can be identified using several ways.

The simplest way is turning on the left LED Strobe Warning Light.

If the right one comes on regardless of its brightness, there is a problem.

This problem can be addressed by buying a new flasher relay.

Purchasing a new relay is much simpler and ensures that the problem does not reoccur.

It is vital to confirm that you have the correct pin before purchasing the relay.

Another alternative would be to buy a diode circuit and put it in place for the left and right LED Strobe Warning Light.

The diode circuit would require you to remove the dash light.

The last option is not recommended unless your Bike has a Can-Bus system using the load balancing resistor.

It works by tricking your flasher relay by convincing it that it contains regular bulbs by adding extra weight to the circuit.

Once you consider everything in this guide, you will obviously get the best LED strobe warning light bike.

At GoldMore, we are here to skyrocket your LED strobe warning light business.

Contact us now for any inquiries or questions about LED strobe warning light bike.